Do you want more photos? We are happy to provide them. Just let us know what you need.
69 Funky-Vibe
After an important investment in LDR/CDS photocells, long testing hours, and more than 5 prototypes tested once and again, we’ve finally hit the bulls-eye. SABBADIUS manufactures its Original Funky-Vibe version 2020 with the components and specifications of the old 68’s Honey Uni-Vibe & 69s Shin-ei version. We use Custom Made Photocells (LDR/CDS) to give to the Funky-Vibe the Original Uni-Vibe kind of sound. The transistors used here are the Matsushita 2sC828 and 2sC539 for the Pre-Amp section like in the original Uni-Vibe. The pedal features 3 knobs, which set VOLUME, INTENSITY, and SPEED. It has a 1/4-inch (6.5 mm) output connection for a CUSTOM MADE expression pedal, allowing you to control the speed with your foot (Expression Pedal NOT included). It also features 2 footswitches: one of them activates the effect for True Bypass, and the other switch is the CANCEL function that allows you to use the pedal as a Pre-Amp or the original Uni-Vibe effect sound this means that you turn off the lamp bulb keeping a high impedance in the photocells that gives to the sound a wonderful Pre-Amp like Original Uni-Vibe’s did in the foot control pedal with the tact switch. It has a hand painted soft switch with an airbrush and enamel paint lacquered with gloss lacquer for a longer duration of the painting. RED/WHITE soft Rocker Switch that you set the mod´s in RED POSITION DOWN activates the “CHORUS” MODE and when the WHITE POSITION IS DOWN you are in “VIBRATO” MODE
SABBADIUS provides an original 14 Vac ~ 200mA transformer inside the enclosure like the Original Uni-Vibe has and the cable cord from the unit to the wall so is ready to plug and play.
The transformer can be a 100Vac, 120Vac, 127Vac, 220Vac, 230 Vac, and 240Vac for INPUT and for OUTPUT: 14 Vac 200mA The pedal will be shipped with the correct transformer to the country that places the order, for example, if you are from AUSTRALIA you will receive a Funky-Vibe 2020 with a transformer inside of 240Vac for Input, if you are from United States you will receive an inside transformer of 120Vac for Input and the correct cable wire with parallel leads for the wall.
The pedal has a Fuse socket with a fuse inside that is there to protect the circuit in case there is an overload on the voltage. The Fuse is a 100mA / 250v if you need to change it sometime that´s the way you should ask for to your Electronic supplier.
|
VOLUME: sets the output volume. |
|
SPEED: sets the effect’s speed in either mode. |
|
INTENSITY: sets the effect’s intensity or depth. |
|
CHORUS – VIBRATO Mode ROCKER SWITCH: sets whether CHORUS Mode or VIBRATO Mode is activated. |
|
CANCEL Footswitch: activates the lamp Bulb to swirl the effect or turn off the lamp to use as a Pre-Amp like the original Uni-Vibe’s does. |
|
Expression pedal jack: 1/4-inch (6.5 mm) output jack (Amphenol) for an expression pedal, allowing to control the effect’s speed with your foot (EXPRESSION PEDAL NOT INCLUDED) |
|
POWER SW. ON/OFF: Allows the current to flow into the circuit. |
|
TRUE BYPASS: Premium quality 3PDT True Bypass footswitch to turn the effect ON/OFF. |
|
INSTRUMENT: 1/4-inch (6.5 mm) Input jack for instruments. |
|
OUTPUT: 1/4-inch (6.5 mm) Output jack for amplifiers or other effects. |
|
INPUT: 100, 120, 127, 220, 230, OR 240 Vac or Custom Made Transformer. |
|
Soft Rocker Switch RED / WHITE: Hand painted with airbrush and lacquered with enamel paint with a glossy finish. |
|
Fuse socket with a fuse inside that is there to protect the circuit in case there is an overload on the voltage. |
|
Custom Made Photocells exclusive for Sabbadius Electronics. |
|
More VOLUME for CHORUS Mode. |
|
SPEED LED indicator. |
|
Black Chicken Head Knobs with Crest. |
|
More 3D Underwater kind of sound. |
|
Original 1960s Japanese Lamp Bulb |
|
100% Hand Wired & Hand Welded. |
|
100% analog circuit material: Aluminium enclosure. |
|
Size: Length 182mm x Width115mm x Height: 60mm. |
|
Weight: 925grs. Aprox. |