Pictures Are Stock Photos!
OD-200 Hybrid Drive
With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit AD/DA, 32-bit internal processing, and 96 kHz sampling rate, plus support for additional control via external switches, an expression pedal, or MIDI.
The OD-200 Hybrid Drive brings next-level sound, feel, and flexibility to overdrive and distortion, combining decades of BOSS tone expertise with innovative technologies. Powered by hybrid analog/digital circuitry, this dream pedal delivers any drive tone you can imagine via 12 primary modes, 15 boost types, series/parallel gain paths, and more. There’s even an advanced gate on board, ideal for both eliminating noise and adding tightness to high-gain drive tones.
Version 1.1 Update: User Memory Expansion
The free Version 1.1 software update brings increased flexibility to the BOSS 200 series, greatly expanding the onboard memory capacity for storing and recalling sounds. There are now 128 user setups available. Setups can also be recalled directly via MIDI program change.
The Version 1.1 update is available in the Downloads section for each 200 series pedal.
|
Sampling Frequency |
|
96 kHz |
|
AD/DA Conversion |
|
32 bits |
|
Processing |
|
32-bit floating point |
|
Drive Circuit |
|
Analog + Digital |
|
Modes |
|
12 modes |
|
OVERDRIVE, BLUES, SCREAM, CNTR OD, X-DRIVE, DIST, X-DIST, STACK DRIVE, FAT DIST, BROWN, X-METAL, FUZZ |
|
Memory |
|
127 + Manual |
|
Nominal Input Level |
|
INPUT: -10 dBu |
|
Maximum Input Level |
|
INPUT: +7 dBu |
|
Input Impedance |
|
INPUT: 1 M ohm |
|
Nominal Output Level |
|
OUTPUT: -10 dBu |
|
Maximum Output Level |
|
OUTPUT: +7 dBu (Load Impedance: 220 k ohms or greater) |
|
Output Impedance |
|
OUTPUT: 1 k ohms |
|
Recommended Load Impedance |
|
OUTPUT: 10 k ohms or greater |
|
Bypass |
|
Buffered bypass |
|
Controls |
|
ON/OFF switch, MEMORY/BOOST switch |
|
MODE knob, DRIVE knob, LEVEL knob, PARAM knob, LOW knob, MIDDLE knob, HIGH knob |
|
PARAM button, MEMORY button |
|
Display |
|
7 segments, 3 characters (LED) |
|
Indicator |
|
PARAM indicator, MEMORY (MAN, 1--4) indicators |
|
Connectors |
|
INPUT jack, OUTPUT jack: 1/4-inch phone type |
|
CTL 1, 2/EXP jack: 1/4-inch TRS phone type |
|
MIDI (IN, OUT) jacks: Stereo miniature phone type |
|
DC IN jack |
|
USB port: USB micro B-type (program update only) |
|
Power Supply |
|
Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately) |
|
Current Draw |
|
220 mA |
|
Expected Battery Life Under Continuous Use |
|
Alkaline: Approx. 6 Hours |
|
* These figures will vary depending on the actual conditions of use. |
|
Accessories |
|
Owner's Manual |
|
Leaflet "USING THE UNIT SAFELY" |
|
Alkaline battery (AA, LR6) x 3 |
|
Rubber foot x 4 |